1.Description:

K11 waterproof coating is a two-component cement-based polymer waterproof material. The

liquid material is synthetic polymer emulsion; the powder material is a mixture of cement, quartz sand, talcum powder and additives. During construction, mix the liquid and powder materials in proportion and stir evenly, then scrape and apply them to form a continuous waterprooflayer.

2.Application range:

Waterproofing of kitchen and bathroom, building exterior walls, etc.

3.Product features:

(1) Can be constructed on wet or dry substrates.

(2) Long service life, weather resistance, aging resistance, oil resistance, good acid resistance.

(3) Non-toxic, harmless, non-polluting, safe and easy construction, short construction period.

(4) Excellent waterproof performance.

(5) Waterproofing of kitchen and bathroom, building exterior walls, etc.

4.construction technology

(1) Base layer treatment: The base layer must be smooth, firm, clean, and free of bright water.

(2) Mixing: Use an electric mixer to mix evenly without lumps.

(3) Coating: Use a roller to apply, and the coating should be thin and even.

(4) Finally, test the water after construction.

5.Transportation and storage

Transportation: The product is generally non-flammable and non-explosive material and can be transported as general cargo. However, during transportation, it should be protected from freezing, rain, direct sunlight, crushing, and collision to ensure the packaging remains intact.

Storage: When storing, ensure proper ventilation, dry conditions, and protection from direct sunlight. The storage temperature should not be below 0° C, and the product should not be stacked more than three layers high.