Self-repairing waterproof coating
Self-repairing waterproof coating is the latest new intelligent high-tech waterproof coating developed by our company,which is made out of the organic liquid of Polymer copolymer emulsion and auxiliaries fillers, mixed with the special powder additives.Self repairing water coating can not only function as waterproof layer but also can repair the water leakage automatic under the erosion of water,it is able to increase the liability ofwaterproof systemm.
Usage
- Underground construction.
- Corridor.
- Kitchen.
- Bathroom.
- Pool and dam(suitable for drinking water project).
Advantages
1. Environmentally-friendly materials,harmless to surroundings and humans.
2. Self-repairing automatic under the erosion of water,save the cost of maintenance.
3. Good aging resistance: outstanding outdoor durability,high tensile strength and high elongation.
4. Mix in proportion for easily applying.
5. Good adaptability to shrink deformation and cracking of the substratum.
Microcapsule principle
1. Waterproof layer is split apart when concrete begins to crack.
2. The expansion material expands when it meets water,making the crack of waterproof layer shrunken.
3. The microcapsules rupture to form crystals and fill the shrunken cracks.
4. Completely repairing.
Application
1. The surfaces must be kept flat,film,clear and non-smear.The relatively large pitting and crevice should be mended with water-stopping mortar.internal/external corner and tube root shall be made into circular arc with cement mortar.
2. The material should be weighed and stir evenly.b
3. Apply by roller or brush and keep the paintcoat thin and evenly.
Attentions
1. Construction should not be less than 5°C degrees or in the rainy day.
2. Surface decoration construction should applied after waterproof coating completely solidification, completely solidification time is about2days, moist environment should be extended appropriately.
3. Liquid should be sealed and stored in a cool place above 5°C,powder should be stored in dry place.
4. Shelf life is about 6 months.
Technical Index
|
NO. |
ltems |
Index |
|
|
1 |
Solid content/% ≥ |
70 |
|
|
2 |
Tensile strength (Mpa) ≥ |
No treatment, Mpa |
1.8 |
|
Heat treatment % |
80 |
||
|
Alkaline treatment% |
70 |
||
|
Soaking treatment % |
70 |
||
|
3 |
Elongation at break ≥
|
No treatment % |
30 |
|
Heat treatment % |
20 |
||
|
Alkaline treatment% |
20 |
||
|
Soaking treatment % |
20 |
||
|
4 |
Bonding strength ≥ |
No treatment, Mpa |
1 |
|
Heat treatment,Mpa |
1 |
||
|
Alkaline treatment,Mpa |
1 |
||
|
Soakingtreatment,Mpa |
1 |
||
|
5 |
Impermeability |
0.3MPa,30mins no leakage |
|
|
6 |
Self-reparingtime ≤ |
24h |
|
|
7 |
Anti-permeability(Mpa) ≥ |
0.8 |
|
Previous: No more
Next: No more
EN











Production Base
Operations Center
Tel:
E-MAIL: 




